M7 x 1.0mm titanium 12 point bi hex flange nuts

M7 x 1.0mm titanium 12 point bi hex flange nuts
£2.32
  • The material is grade 5 titanium, most widely used titanium alloy. It has excellent corrosion resistance to salt water, marine atmospheres and a variety of corrosive media temperatures below 300 ° C.
  • When using these nuts with another titanium fasteners, such as a bolt or stud, it is important to apply either an anti-seize grease such as molybdenum disulphide or copper ‘slip’ grease. 
  • Failure to apply anti-seize grease (on non-safety critical fixings) may cause the threads to gall on final torque of fastener and a seized/damaged thread.
  • For safety critical applications, do NOT apply anti-seize grease; apply a thread locking solution (e.g Loctite medium strength) on the threads before assembly.
  • Recommended maximum tightening torque for a Titanium M7 x 1.0 fastener ~14 Nm (Always check any particular torque specifications for your application).